Best Sewing Machines for Shoe Making: Post-Bed, Cylinder, Walking-Foot and Home Picks

9 min read

As an Amazon Associate I earn from qualifying purchases. Our disclosure policy.

The short answer

The Yamata FY810 is the post bed for closing uppers, the Consew 206RB-5 is the walking-foot flatbed for heavy flat parts, and the Janome HD9 is the home machine a shoemaking school uses.

Our verdict

Top Picks

Closing a shoe upper is post-bed work: on leatherworker.net, moderator Wizcrafts told a new shoemaker to “look into a 7 inch tall post machine with a roller foot and roller feed dog”. Flat parts suit a walking-foot flatbed, and the shoemaking school I Can Make Shoes teaches on a strong home flatbed. Repairs are a patcher’s job: see our cobbler machine guide. We picked one machine per job, all in stock on Amazon when we checked on 15 November 2026.

Finder

Find a machine for your shoemaking

Pick what you will sew most. The suggestion is our editorial starting point from the four machines below, not a test result. All four sat in one mid-range price band as of 15 November 2026.

What will you sew most?
Price tier

Price tier legend: $ = entry level, $$ = mid-range, $$$ = premium, relative to the machines in this guide. All four sat in one mid-range band on 15 November 2026.

Compare the picks

Compare the shoe-making machines

Yamata FY810 Drop Feed Heavy Duty Single Needle Lockstitch…FY810Best Post Bed for UppersUppers, closingPost: 7 inDrop feed: roller presser$1,599.99
NeedleDP-F22/134S
Clearance or max thickness6 mm clearance: listing
Stitch length5 mm

Evidence: owner reports, no independent test

FY335A Cylinder Arm Walking Foot Industrial Sewing Machine…FY335ABest Cylinder Arm for BindingBinding, edges, bagsCylinder: 50 mmCompound: walking foot$1,699.99
Needle135×17
Clearance or max thicknessUp to 7/16 in: dealer
Stitch length6 mm

Evidence: owner reports, no independent test

Consew 206RB-5 Walking Foot Industrial Sewing Machine with…206RB-5Best Walking Foot for Flat PartsFlat parts, strapsFlatCompound: walking foot$1,665.68
Needle135 x 17
Clearance or max thickness14 mm foot lift: Consew
Stitch length10 mm

Evidence: owner reports, no independent test

Janome HD9 White: Sewing MachineHD9Best Home Machine for ShoemakingHome studio, uppersFlat: homeFeed dogs: even-feed foot optional$1,599.00
NeedleHLx5: listing
Clearance or max thicknessNot published
Stitch lengthNot published

Evidence: owner reports, no independent test

Prices as of Nov 18, 10:35 UTC

Figures come from the listings, Yamata dealer Sewmark, Consew and an HD9 owner review. Clearance is the gap under the raised foot, not a rated thickness.

How We Picked These Machines

How this guide was built

from maker and dealer pages, Amazon listings, a shoemaking school’s advice, one owner review and forum owner reports; we have not tested these products ourselves.

What each machine had to show

  • A shoemaking job: closing uppers, binding, heavy flat parts, or home work.
  • Published figures: bed, feed type, needle, max material thickness or clearance, stitch length, motor type and throat space, credited to their source.
  • A distinct role: the Janome 1600P-QC and Yamata 1341 repeat roles here.
  • In stock on Amazon: on 15 November 2026; the iKonix KS-335 and two Techsew machines were not.
Sources and owner reports

Sources and owner reports

We searched for an independent review of each pick and found forum owner reports and one owner’s HD9 review, but no independent test. We did not grade Amazon customer ratings.

Detailed Reviews

Yamata FY810, Best Post Bed for Uppers

Best Post Bed for Uppers
Yamata FY810 Drop Feed Heavy Duty Single Needle Lockstitch…

FY810

Post: 7 in

A shoemaker closing uppers on a post who will assemble the table.

$1,599.99 from AmazonAs of Nov 18, 10:35 UTC

Verdict

The post-bed type shoemakers are told to look for, as a kit you assemble; its listing says “Drop feed”.

Evidence: No independent test; owner reports. Ian Chaffardet, owner blog (fashion design, not shoes): FY810.

The FY810 Amazon listing calls it “Suitable for vamping, space stitching and tipping on shoes”, with a 7 in post, “Drop feed” and a “Roller presser foot allows for turning of sharp corners and tight curves”. It lists 3,000 stitches per minute (dealer Zamir Sewing lists both 2,500 and 3,000), a 6 mm clearance and a 5 mm stitch.

On r/Cordwaining, wanderedoff, who uses a Pfaff, says “I know people who have bought the Yamata FY810 new and really liked it.” Feed type is the open question: on leatherworker.net, Wizcrafts notes roller-foot post machines “come in bottom feed only, or top and bottom synchronized feed”, and Uwe told the shoemaker who asked “I also think the kind of machine you probably want for shoe work is a dual driven wheel setup”.

Specs (linked: Yamata FY810 kit with table and servo)

  • Bed: post, 7 in (listing)
  • Feed: drop feed with roller presser (listing)
  • Needle: DP-F22/134S; bobbin G (listing)
  • Clearance: 6 mm; stitch length 5 mm (listing)
  • Motor: servo, wattage not published (listing)
  • Sold by: a third-party seller, not Amazon, in stock when we checked on 15 November 2026

Pros

  • A 7 in post with a roller presser, listed for vamping and tipping on shoes
  • Table, servo and light in the kit (listing)

Cons

  • Listing names no driven top wheel, the setup one forum member suggests for shoes
  • Arrives as a kit that needs assembly

Who should buy it

A shoemaker closing uppers on a post who will assemble the table.

Check on Amazon

Yamata FY335A, Best Cylinder Arm for Binding

Best Cylinder Arm for Binding
FY335A Cylinder Arm Walking Foot Industrial Sewing Machine…

FY335A

Cylinder: 50 mm

A maker who binds edges or hems shoes and bags, alongside a flatbed.

$1,699.99 from AmazonAs of Nov 18, 10:35 UTC

Verdict

A narrow cylinder arm with compound feed, for binding and edges on shaped work.

Evidence: No independent test; owner reports. r/myog owner: FY-335A.

Yamata dealer Sewmark lists a “Narrow cylinder arm – 50mm diameter” that “is developed for hemming shoes, purses, belts, for sewing bags”, a 7/16 in maximum, “thread up to size 207”, 2,500 stitches per minute and a 6 mm stitch. Its Amazon listing says “The binder attachment is sold separately.”

On r/myog, onespeeder, who owns this model, says “I own that exact machine and run it exclusively for binding. It works exceptionally well for that purpose.” On leatherworker.net, Flatcapper, who bought a “Yamata fy335” (suffix not stated) for bags, found “The machine actually sews nicely. It may need some slight adjustments”, but “the binder attachments are in the way especially if you need to rotate your leather piece”.

Specs (linked: Yamata FY335A kit with table and servo)

  • Bed: cylinder, 50 mm (Sewmark)
  • Feed: compound walking foot (Sewmark, listing)
  • Max thickness: 7/16 in; thread up to size 207 (Sewmark)
  • Stitch length: 6 mm; work space 258 mm (Sewmark)
  • Motor: servo, wattage not published (listing)
  • Sold by: a third-party seller, not Amazon, in stock when we checked on 15 November 2026

Pros

  • A 50 mm cylinder arm with compound feed for edges on shaped work (Sewmark)
  • A stated 7/16 in thickness and thread up to size 207 (Sewmark)

Cons

  • Flat panels are less efficient on a cylinder bed, an r/myog commenter says
  • Binder attachment sold separately; one owner found binder parts in the way

Who should buy it

A maker who binds edges or hems shoes and bags, alongside a flatbed.

Check on Amazon

Consew 206RB-5, Best Walking Foot for Flat Parts

Best Walking Foot for Flat Parts
Consew 206RB-5 Walking Foot Industrial Sewing Machine with…

206RB-5

Flat

A shoemaker sewing heavy flat parts and straps with thick thread before closing.

$1,665.68 from AmazonAs of Nov 18, 10:35 UTC

Verdict

The flat-work machine a forum moderator names for shoemakers; thin thread needs softer springs.

Evidence: No independent test; owner reports. The Upholstery Forum, Consew 206RB-5: 206RB-5.

In the new-shoemaker thread, Wizcrafts, who does not list one among his own machines, wrote: “If you want to sew flat work before combining the edges, get an upholstery class walking foot machine, like a Consew 206rb-5. That machine handles from #18 through #138 thread with ease. It is too strong for #46 and thinner thread”, but “it could be dumbed down with softer action tension springs”. Consew lists compound feed with “Alternating (Walking) Presser Feet”, a 14 mm foot lift, a 10 mm stitch and 258 mm of work space.

On The Upholstery Forum, owner Mtl_Biker says “it actually remains my favorite”. On leatherworker.net, Tsiatko found their new one “marking up leather and sewing crooked while using multiple layers”. In the same thread, ljk says “The 206rb-5 is Chinese and ok but does not meet the quality of the Japanese versions. I had a 206rb 5 in my leather shop and it was reliable.”

Specs (linked: Consew 206RB-5 with table and servo)

  • Bed: flat (Consew)
  • Feed: compound, walking foot (Consew)
  • Needle: 135 x 17; bobbin M (Consew)
  • Foot lift: 14 mm; stitch length 10 mm (Consew)
  • Motor: servo, wattage not published (listing)
  • Sold by: a third-party seller, not Amazon, in stock when we checked on 15 November 2026

Pros

  • Compound walking-foot feed with a 14 mm lift and 10 mm stitch (Consew)
  • Named by a forum moderator for shoemakers’ flat work, #18 to #138 thread

Cons

  • Needs softer tension springs for #46 and thinner thread, per Wizcrafts
  • One new owner’s machine marked leather and sewed crooked while still being adjusted

Who should buy it

A shoemaker sewing heavy flat parts and straps with thick thread before closing.

Check on Amazon

Janome HD9, Best Home Machine for Shoemaking

Best Home Machine for Shoemaking
Janome HD9 White: Sewing Machine

HD9

Flat: home

A home shoemaker who sews uppers flat and has no room for an industrial stand.

$1,599.00 from AmazonAs of Nov 18, 10:35 UTC

Verdict

The home machine a shoemaking school uses, for makers without room for an industrial.

Evidence: No independent test; owner reports. AppleGreen Cottage, owner review: HD9 v2.

I Can Make Shoes says “In our shoemaking workshops we use a ‘Janome HD9 Professional’ sewing machine.” The HD9 Amazon listing, model “HD9” (version not stated), lists “1,600 stitches per minute”, “up to 11 lbs of presser-foot pressure, an extra-high foot lift” and a jumbo bobbin.

AppleGreen Cottage, a bag maker who has sewn on an HD9 v2 for nearly a year, writes that it “Handles thick bag layers with such ease (my dream come true!)”. Their nitpick: jumbo bobbins only. On r/myog, gofndn, answering a buyer weighing an HD9 for veg-tan leather, says “Walking foot machines will outperform anything after 4 mm in total thickness.”

Specs (linked: Janome HD9, white)

  • Bed: flat, home size; throat 9 in on the v2 (owner review)
  • Feed: feed dogs, straight stitch only; even-feed foot optional (owner review)
  • Needle: HLx5 (listing)
  • Speed: 1,600 stitches per minute; foot pressure up to 11 lb (listing)
  • Motor: about 95W on the v2, per the owner review’s table
  • Sold by: a third-party seller, not Amazon, shipped by Amazon, in stock when we checked on 15 November 2026

Pros

  • Straight-stitch machine a shoemaking school teaches on, with up to 11 lb of foot pressure
  • Compact enough for a sewing corner, with no industrial table (v2 owner review)

Cons

  • Past about 4 mm total, a forum poster says walking-foot machines do better
  • No post or cylinder, so closed uppers are harder to reach

Who should buy it

A home shoemaker who sews uppers flat and has no room for an industrial stand.

Check on Amazon

Post, Cylinder or Flatbed

Which bed for which seam

I Can Make Shoes says “Most domestic sewing machines will have no issue stitching through the thicker materials/leather required for making shoe uppers”. Forum shoemakers push harder: JAM, on leatherworker.net, gets “seriously stuck assembling uppers and linings” without a post bed. On r/Cordwaining, jholden0, who bought a post bed and a walking foot used, calls their Singer HD 4423 “trash for sewing shoes compared to the other two”. For leather beyond shoes, see our leather sewing machine guide.

Feed and thread

Wizcrafts warns “Don’t make the mistake of thinking that any post machine will do for shoe making”, and adds “Most post machines are able to tension #92 thread and under.” Compound feed is covered in our walking foot guide.

The three industrials ship as servo-and-table kits of 150 lb or more (listings); to slow one down, see our servo motor guide; more heavy machines sit in our heavy-duty hub.

Frequently Asked Questions

Q. What machine do I need to make shoes?

For closing uppers, a post bed such as the Yamata FY810; for flat parts, a walking foot such as the Consew 206RB-5; at home, a strong flatbed such as the Janome HD9.

Q. Can a regular sewing machine sew shoe leather?

For uppers, often yes: I Can Make Shoes says “you do not need a shoe/leather specific sewing machine”. On r/Cordwaining, OneMinuteSewing says of the Singer 4423 HD: “I’d never recommend one to sew leather.”

Q. Do I need a machine to attach soles?

Often not: I Can Make Shoes says “Most soles are glued on so you wont need a machine for this.” For stitched soles, Wizcrafts names a “McKay or Landis sole stitcher”; none of the four is one.

The bottom line

Final Verdict

Closing uppers: Yamata FY810 (check price). Binding and closed shapes: Yamata FY335A (check price). Heavy flat parts: Consew 206RB-5 (check price). A home studio: Janome HD9 (check price). All four were in stock from third-party sellers, not Amazon, when we checked on 15 November 2026.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Blazing Needles Team
Blazing Needles Team

Written and reviewed by the Blazing Needles Team. See the About page for how we work.