The short answer
The Juki TL-2010Q is the all-round pick with a speed slider and an even feed foot in the box (Juki), the Brother PQ1600S is the entry tier with a pin feed and seven feet (Brother), and the Juki TL-18QVP has a float function and three quilting feet.
Our verdict
Top Picks
A straight stitch sewing machine sews one stitch, a straight line, and gives up zigzag and buttonholes for speed and a small, round needle hole. Here are five from Juki, Brother and Janome, in stock on Amazon when we checked on 15 November 2026. If you need zigzag too, start with our sewing machines hub.
Finder
Find a straight stitch machine for how you sew
Pick what you sew most and a price tier. The suggestion is our editorial starting point from the five machines below, not a test result.
Price tier legend: $ = entry level, $$ = mid-range, $$$ = premium, relative to the machines in this guide.
Compare the picks
Compare the straight stitch machines
Throat is the room right of the needle, width x height, as the named source states it.
TL-2010QBest OverallPiecing, quilting, all-round8.5 x 6 in1500 spm$1,239.00
Evidence: owner reports, no independent test
PQ1600SBest ValuePiecing, quilting5.7 x 8.7 in: width not named1500 spm$999.99 Prime
Evidence: owner reports, no independent test
1600P-QCBest for Fast PiecingPiecing, bags9 x 6 in listing: 8.8 x 5.5 in dealer1600 spm$999.00
Evidence: owner blog after almost three years of use; not a lab test
TL-18QVPBest Premium PickQuilting, thick seams215 x 150 mm1500 spm$1,899.00
Evidence: owner reports, no independent test
HD8Best Janome with a TablePiecing, quilting9 x 6 in listing: 8.8 x 5.5 in dealer1600 spm$1,199.00
Evidence: maker specs only, no independent test
How We Picked These Straight-Stitch Machines
How this guide was built
built from manufacturer documentation, dealer spec pages, the Amazon listings and owner reports; we have not tested these products ourselves.
What decided the picks
- Straight stitch only, as the maker, dealer or listing states it.
- Speed: maximum stitches per minute and any speed slider.
- Feed and feet: even feed foot, pin feed or float function, and the feet in the box.
- Room and extras: throat space, table, knee lifter.
- Availability: new and in stock on Amazon, seller named. The Juki TL-2000Qi, Brother PQ1500SL and Elna Elnita EF1 were out of stock when we checked on 15 November 2026, and the in-stock Juki TL-15 and Janome HD9 V2 repeated a role, so we kept five machines with distinct roles.
Where the figures come from and what the ranking threads say
Where the figures come from
Maker figures: Juki America, Juki’s global site and Brother USA. Janome’s US site would not load for us, so Janome figures come from the Amazon listings and the Janome Junkies dealer. The World Weidner dealer chart covers the Juki TL line and gives its machine type as “High Speed Straight Stitch”. We found no independent lab test of any of the five, so the evidence is owner reports, and listing and dealer specs alone for the HD8.
What the ranking threads say
In the r/sewhelp thread that ranks for this search, the poster asks for a machine that “will piece cotton and sew through thick layers of fabric”. Replies name the Juki TL line and the Janome HD9, and the top reply says: “The very best thing you can do is go into a dealer and test drive them.”
Detailed Reviews
Juki TL-2010Q, Best Overall
Sewists who want speed control and a walking foot, with owner reports.
$1,239.00 from AmazonAs of Nov 18, 18:20 UTCVerdict
A straight-stitch-only Juki with a 200 to 1,500 spm speed slider, an even feed foot and a 23 x 13 inch table in the box, sold by SelgoVacuumParts:com when we checked on 15 November 2026.
Evidence: No independent test; owner reports. r/quilting, TL-2010Q owners: TL-2010Q.
Juki America lists it as “Straight Stitch Only” and says you can “Set the speed from 200 to 1500 stitches per minute”. Its standard list has a standard foot, a zipper foot, a ¼ quilting foot, an even feed foot, a knee lifter and the table, and it has an automatic needle threader. The World Weidner chart gives the throat as “8.5 inches by 6.0 inches”. In r/quilting, one owner wrote: “I love my Juki TL2010Q. It’s straight stitch only, which is all I need for quilting and the big throat space is lovely.” Another TL-2010Q owner in a second thread warns that “the presser feet for these high-shank machines cost a lot more than low-shank feet.” The limit is the type: a TL-2000 owner (the sibling without the slider) in the ranking r/sewhelp thread wrote, “I always get sad when I need to zig zag something and have to take out my lightweight Brother.”
Specs (linked: TL-2010Q)
- Stitches: straight stitch only (Juki America)
- Throat: 8.5 x 6 in (World Weidner)
- Max speed: 1,500 stitches per minute, slider from 200 (Juki America)
- Feet and extras: even feed foot, ¼ quilting foot, zipper foot, 23 x 13 in table, knee lifter (Juki America)
- Threader and weight: automatic needle threader; 25.4 lb (Juki America)
Pros
- Speed slider from 200 to 1,500 stitches per minute, per Juki
- Even feed foot, table and knee lifter in the box
Cons
- No zigzag, buttonhole or decorative stitches
- Extra high-shank feet cost more, per an owner
Who should buy it
Sewists who want speed control and a walking foot, with owner reports.
Brother PQ1600S, Best Value
Piecers who want a fast straight-stitch machine at the lowest tier here.
$999.99 from AmazonAs of Nov 18, 14:00 UTCVerdict
The entry tier here: 1,500 stitches per minute, a pin feed and seven feet in Brother’s carton list, sold by Amazon.com when we checked on 15 November 2026.
Evidence: No independent test; owner reports. r/quilting, PQ1600S owner: PQ1600S.
Brother USA gives “Built-in Stitch Selections” as 1 and “Button Hole Styles” as 0, sewing “up to 1,500 stitches per minute”, four color-coded feed dog levels and a “Pin Feed Mechanism”. It gives “an expanded 11.1″ x 23.3″ wide table and a large 5.7″ x 8.7″ needle-to-arm space” without saying which figure is the width. The carton list names a general purpose, rolled hem, zipper, invisible, ¼”, free motion quilting and pin feed foot, though the same page’s table answers “No” for “Free Motion Quilting Foot”. The Ken’s Sewing Center dealer lists an “Automatic needle threading system”. On the pin feed, an owner in r/quilting wrote: “I bought the machine, and am happy to report that all included feet have a groove for the pin feed.”
Specs (linked: PQ1600S)
- Stitches: 1 built-in stitch; 0 buttonhole styles (Brother USA)
- Throat: 5.7 x 8.7 in needle-to-arm, width not named (Brother USA)
- Max speed: 1,500 stitches per minute (Brother USA)
- Feet and extras: 7 feet incl. pin feed foot; 11.1 x 23.3 in table (Ken’s: 12 x 18 in); knee lifter (Brother USA)
- Threader and weight: automatic needle threader (Ken’s Sewing Center dealer); unit weight 23.81, no unit given (Brother USA)
Pros
- Pin feed and four feed dog levels for shifting layers, per Brother
- Seven feet, a wide table and a knee lifter in the carton list
Cons
- Brother’s page contradicts itself on the free-motion foot
- Workspace width not identified; no speed slider listed by Brother or Ken’s
Who should buy it
Piecers who want a fast straight-stitch machine at the lowest tier here.
Janome 1600P-QC, Best for Fast Piecing
9 x 6 in listing: 8.8 x 5.5 in dealer
Quilters who want a long-term owner's report over the HD8's fuller box, and will buy feet separately.
$999.00 from AmazonAs of Nov 18, 10:47 UTCVerdict
A Janome straight-stitcher at up to 1,600 stitches per minute, with a separate bobbin-winding motor and few feet listed, sold by Bristow & Ball when we checked on 15 November 2026.
Evidence: No independent test; owner reports. In Color Order, 1600P-QC owner blog: 1600P-QC.
The listing gives “up to 1,600 stitches per minute”, “The generous 9″ x 6″ workspace” and “an independent bobbin winder”; the Janome Junkies dealer gives the throat as “8.8” x 5.5””. The feet the listing names are a sewing foot and a hemmer foot. In Color Order, who bought a 1600P-QC and wrote after almost three years, says: “I love this machine. If it broke down today, I’d buy another one.” They add: “Especially when piecing, I can cruise right along.” Their limits: “it is pretty loud”, “It can take a bit of fiddling to get the tension just right”, and it “needs oiling every few hours”.
Specs (linked: 1600P-QC)
- Stitches: straight stitch only (listing)
- Throat: 9 x 6 in (listing); 8.8 x 5.5 in (Janome Junkies)
- Max speed: 1,600 stitches per minute (listing)
- Feet and extras: sewing foot, hemmer foot, knee lifter; separate bobbin winder (listing)
- Threader and weight: built-in needle threader (Janome Junkies); 31 lb (listing item weight)
Pros
- Up to 1,600 stitches per minute, per the listing
- Separate bobbin winder: wind while you sew, per the owner review
Cons
- Few accessories listed: budget for a walking foot and ¼” foot
- Loud and fussy on tension, per a long-term owner
Who should buy it
Quilters who want a long-term owner’s report over the HD8’s fuller box, and will buy feet separately.
Juki TL-18QVP, Best Premium Pick
Quilters who want three quilting feet in the box and sew over bulky seams.
$1,899.00 from AmazonAs of Nov 18, 11:16 UTCVerdict
The TL-2010Q’s premium sibling, with a float function and three quilting feet, sold by World Weidner when we checked on 15 November 2026.
Evidence: No independent test; owner reports. r/quilting, TL-18QVP owner review: TL-18QVP Haruka.
Juki’s global site describes a float function where “The presser foot floats 0 to 2 mm above the material”, and lists “Arm size 215(W) x 150(H)mm”, “Max. 1,500SPM”, an automatic needle threader and drop feed. Its presser feet list adds a hemming foot, a 1/5″ quilting foot, an open-toe quilting foot, a compensating foot and a 1/4″ presser foot to the TL-2010Q’s four: nine feet. Juki’s US page lists seven, with the compensating foot optional, and gives the weight as 25.4 lb. An owner’s long r/quilting review sums it up: “TL;DR Great straight stitch machine, but a number of annoyances.” The walking foot that came with it “was leaving black residue on my white fabric!”, and at full speed “the stitches pull out a little.”
Specs (linked: TL-18QVP Haruka)
- Stitches: straight stitch only (World Weidner)
- Throat: 215 x 150 mm, about 8.5 x 6 in (Juki global; World Weidner)
- Max speed: 1,500 stitches per minute (Juki global)
- Feet and extras: 9 feet incl. even feed and three quilting feet; float function; table; knee lifter (Juki global)
- Threader and weight: automatic needle threader; 25.4 lb (Juki US; Juki global prints 24.5 lb)
Pros
- Float function for thick seams and quilts, per Juki
- Three quilting feet and an even feed foot, per Juki
Cons
- Premium tier for the same throat as the TL-2010Q
- One owner reports a marking walking foot and stitches that “pull out” at top speed
Who should buy it
Quilters who want three quilting feet in the box and sew over bulky seams.
Janome HD8, Best Janome with a Table
9 x 6 in listing: 8.8 x 5.5 in dealer
Sewists who want the TL-2010Q's slider, table and walking foot from Janome, before forum owner reports.
$1,199.00 from AmazonAs of Nov 18, 12:32 UTCVerdict
A Janome straight-stitcher at 1,600 stitches per minute that ships with an extension table, an even feed foot and a darning foot, sold by Zentra, LLC when we checked on 15 November 2026.
Evidence: No independent test; maker specs. Source: Amazon listing and Janome Junkies dealer.
The listing gives “up to 1,600 stitches per minute”, “The generous 9″ x 6″ workspace” and an “Extra Wide Extension Table” and “Even Feed foot” among the included components. The Janome Junkies dealer gives the throat as “8.8” x 5.5” to the right of the needle” and lists a speed control slider. We found no independent review or forum owner report of the HD8 in our searches, and we did not grade its Amazon customer reviews.
Specs (linked: HD8)
- Stitches: straight stitch only (listing)
- Throat: 9 x 6 in (listing); 8.8 x 5.5 in (Janome Junkies)
- Max speed: 1,600 stitches per minute (listing)
- Feet and extras: extension table, even feed foot, darning foot and plate, knee lifter (listing)
- Threader and weight: built-in needle threader (Janome Junkies); 31 lb (listing item weight)
Pros
- Extension table and even feed foot in the box, per the listing
- Up to 1,600 stitches per minute, per the listing
Cons
- No forum owner reports found yet
- Listing and dealer disagree on throat size
Who should buy it
Sewists who want the TL-2010Q’s slider, table and walking foot from Janome, before forum owner reports.
Before You Buy: What a Straight-Stitch Machine Won’t Do
One stitch, no buttonholes
Diary of a Quilter, the top result and a review of a Baby Lock Accomplish the maker supplied, lists as a con: “Straight-stitches only – no zigzag, buttonhole, or satin stitch options”. The upside, per the same review, is a needle plate with “a small, round hole” that keeps block corners from being pulled down.
Noise, light and oil
The 1600P-QC owner calls it “pretty loud”, oils it every few hours and uses a backup machine “for it’s free arm and buttonhole capabilities”. A Juki owner (model not named) in r/quilting wrote: “The machines light is completely pathetic, and I had to install additional lighting.”
Power: not an industrial
Juki files the TL line under “Semi Professional”, and the 1600P-QC owner calls theirs “a semi-industrial machine”, despite its “Industrial” listing title. In r/sewing, a commenter who chose a Juki TL described the class as “about 1/3rd the power of an industrial in a 25 lb. machine with a carrying handle.” For heavier work, see our large throat machines for quilting for more throat, or our best sewing machines for all-rounders.
Frequently Asked Questions
Q. Which sewing machine is best for straight stitch?
For a dedicated machine, the Juki TL-2010Q here. For a light machine with zigzag, see our lightweight sewing machines for quilting.
Q. Which sewing machine has the best stitch quality?
We found no lab test that measures stitch quality. Owners in r/quilting praise the TL-2010Q and a long-term owner praises the 1600P-QC, while the TL-18QVP reviewer saw stitches “pull out a little” at top speed.
Q. What are the best settings for straight stitch?
On the 1600P-QC, In Color Order pieces with 75/11 HLx5 needles; for free motion they set “stitch length to 0” and “presser foot pressure to 0”.
Q. What is the best straight stitch sewing machine for quilting?
The maker, listing or dealer pitches all five at quilters. For most quilting feet in the box, the Juki TL-18QVP; for a walking foot at a lower tier, the Juki TL-2010Q or Janome HD8.
The bottom line
Final Verdict
The Juki TL-2010Q (check price) is the best straight stitch sewing machine here, with a speed slider and walking foot included (sold by SelgoVacuumParts:com when we checked on 15 November 2026). The Brother PQ1600S (check price) (sold by Amazon.com when we checked on 15 November 2026) is the entry tier, and the Juki TL-18QVP (check price) the premium pick. For Janome, take the Janome 1600P-QC (check price) for years of owner use or the Janome HD8 (check price) with its table and walking foot.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
